— 冷庫工程一體化方案解決工程商 —
Hotel refrigerator library body heat preservation system should be national health standard symbols. The library will be selected acco
t in vivo and in vitro by color steel plate， stainless steel plate， embossed alum
board， Base pi
terials， such as rigid polyurethane insulation sandwich ess injection molding， a method of advanced eccentric clasps and lot conn
ate.Excellent sealing maximum reduce the air leakage， enhance the h
effect.T plate， plate quantity and Angle plate combination refrigerator in any space can be assembled. Non-toxic，tasteless， no rust，simple and practical. Energy conservation and environmental protection can reduce the heat transfer due to the temperature difference between inside and outside， in order to achieve the maximum efficiency of refrigeration， cold storage system
Refrigeration units overlap g use imported closed compressor or semi-closed compressor unit. Unit has high， eerrefrigeration capacity is strong， low noise，safe and reliable characteristics of condensation heat sink with efficient wind nd out quantity of heat， in the extreme high temperature environment are keeping high pressure normal， the refrigeration unite
icient refrigeration effect， energy conservation and environmental protection.Inside the refrigerator evaporator by high ceiling cooling fan noise low refrigerating capacity big，automation of the frost. Hotel cole
temperature and humidity recorder（with alarm）.The rollstemperature can be set freely: Automatic constant temperature，automatic switch machine， without manual operation， malling in to digital degree according to ensure the rolls items stored securely
Food cold storage in main storage: meat food， tea edible fungus， dairy products， agricultural
products， fruits， vegetables， aquatic products，cold drinks， ice cream， etc. Food cold storage insulation board with colored steel， glass reinforced plastics， stainless steel， embossing aluminum panel， poly（n cool insulation materials. The use of advanced technology made from composite insulation board， its light weight， goodinsulation effect， shall be corrosion resistant，anti-aging， moth-proofing， no borders
The construction of the cold storage building from the beginning of construction to the installation of equipment is generally carried out at room temperature. The structural system is also in a normal temperature state. After the cold storage is put into use, the structural system is in a low temperature environment. The deformation of the structural system caused by the large temperature difference is much larger than that of ordinary buildings. Temperature stress calculations are carried out to prevent the formation of cold bridge floors and anti-freezing measures should be taken to prevent foundation damage caused by building uplift. At the same time, materials with strong frost resistance should be selected to enhance the frost resistance and durability of the structure.
The load-bearing structure of the small cold storage is generally a beam-and-slab structure and the large-scale multi-storey cold storage adopts the cast-in-place reinforced concrete beamless floor structure. In recent years, the prefabricated beamless floor and the beamless floor frame structure using the riser method are being Gradually promote the design of the wall structure of the cold storage, in addition to meeting the strength and stability, the continuity of the insulation layer and the gas barrier layer should be maintained to meet the requirements of the building thermal industry. The roof structure of the cold storage is subject to direct sunlight for a longer period of time. The effect of the change may cause expansion or contraction deformation. It is preferable to use a prefabricated member to adjust the deformation between the members to reduce the total deformation. In order to prevent the adverse effects on the wall due to the expansion and contraction of the roof, a sliding contact surface can be designed between the roof structure and the wall.
The catering food cold storage and heat preservation storage body adopts the internal embedded parts of the slab wall and the buckle type connection, the assembly and disassembly, and the convenient assembly time is short. This is more suitable for the mobile unit and the personal facade.
The storage board of the catering food cold storage can be produced according to the customer's requirements. Different types of cold storage can be formed through different size combinations. It is convenient for users to make full use of the existing space and building space. The current products have two types of indoor and outdoor single rooms. Between the suite and the multi-room design, the chiller or the tube evaporator can be equipped with two types of water-deficient air-cooling fans. g place ard m Can be for area lack of water.106